Datecs EP-2000 Manual de usuario descargar pdf (Pagina 12)

1 DATECS

OD 07.01.02/v.1

стр. 12 от 65

EP_2000_PM_EN_V.1.60_Nov.2009.doc

Command Details

1. (BEL) Sounds the Buzzer

Code

[07h]

Description By executing this command the buzzer will beep.

2. (HT) Horizontal Tab command

Code

[09h]

Description Shifts the printing position to the next horizontal tab position.

The horizontal tab position is set by

ESC D

. By default the horizontal

tab position is at each 8th character (in 9th, 17th, 25th column) from

FONT A

3. (LF) Printing а line and Paper Feeding command

Code

[0Ah]

Description Prints data stored in input buffer and feeds paper with one line (the

height of a line that has been set).

4. (FF) Printing and paper feeding to the black mark position

Code

[0Ch]

Description

This command prints the data in the printer buffer and searches for

black mark. It is ignored if black mark mode is not specified.

Notes for

Black Mark

Function

1. Error detection in black mark mode:

Paper end

is not checked during printing and also black mark is not

checked.

After receiving

command, printer checks

black mark

and

paper

end

. Once black is detected and white is detected again within

6 mm

paper feed, it is determined as а black mark. If the white is not detected

within 6 mm paper feed, it is determined as paper end.

After receiving

command, if printer cannot detect black mark by

feeding paper for

360 mm

, printer recognizes it as black mark detecting

error. And the result is same as detecting

paper end

To release the error, it is necessary to put correct paper and press

switch long (for more than 1 sec).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 64 65

Comentarios a estos manuales

Sin comentarios

Datecs EP-2000 Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Datecs EP-2000