Datecs EP-2000 Manual de usuario descargar pdf (Pagina 30)

1 DATECS

OD 07.01.02/v.1

стр. 30 от 65

EP_2000_PM_EN_V.1.60_Nov.2009.doc

41. (ESC G) Specifying / Canceling highlighting

Code

[1Bh] + [47h] + n

Description The same as command

ESC E

42. (ESC I) Specifying / Canceling Italic Print

Code

[1Bh] + [49h] + n

Description

can be from

5, but only the least significant bit is of

significance.

Value 0:

Normal Print

Value 1:

Italic Print

43. (ESC J) Printing and Paper Feed n/203 inches

Code

[1Bh] + [4Аh] + n

Description Prints data in the print buffer and feeds paper by

203

inch.

can be from

255

This function is temporary and does not affect the feed operation

thereafter.

When

n=0

the paper is fed by

1/203

inch

44. (ESC L) Selecting page mode

Code

[1Bh] + [4Ch]

Description The command switches from standard mode to page mode. In this

mode the printing is not immediately, but is accumulated in a reserved

for this purpose memory area. The resulting image is printed using one

of the commands

ESC FF

GS FF

GS Z

The page area is the maximum (

576 x 2432

dots for wide paper or

408x

2432 dots

for narrow paper) or the result of the last executed command

ESC W

The print direction is the default (left to right) or the result of the last

executed command

GS T

The current print position is (0, 0) depending on the selected print

direction.

The command is not valid in page mode.

The command is supported in firmware

version 1.51

or higher.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 64 65

Comentarios a estos manuales

Sin comentarios

Datecs EP-2000 Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Datecs EP-2000